
Front Range storms can bring powerful downslope winds and sudden gusts that punish roofing systems. After a wind event in the Denver metro area or along the I‑25 corridor to Cheyenne, a quick, informed check of your roof can prevent small issues from becoming costly leaks.
This guide explains the most common wind‑damage indicators on shingle, metal, tile, and low‑slope commercial roofs—and what to do next.
What wind does to Colorado roofs
High, gusty winds create uplift pressures at roof edges, ridges, and around penetrations. In our climate, wind often pairs with blowing debris, snow, or rain, which can:
– Lift or crease shingles and ridge caps
– Open seams or pull fasteners on TPO/EPDM/Modified Bitumen
– Loosen metal flashings and edge metal
– Crack or dislodge tiles
– Drive water beneath roofing and into attics or ceilings
Common signs on asphalt shingle roofs
Look from the ground with binoculars when possible—avoid climbing if the roof may be damaged or wet.
– Missing shingles or ridge caps
– Creased, curled, or flipped shingle tabs (often a straight line of creasing)
– Shingles that appear misaligned or lifted along edges and rakes
– Exposed, popped, or backed‑out nails; shiny nail heads visible
– Bent or missing drip edge and loose step flashing at walls/chimneys
– Fresh granule piles in gutters or at downspouts after the storm
– Daylight visible in the attic, damp insulation, or new water stains on ceilings
Metal and tile roof indicators
- Metal: Loose or shifted panels, lifted ridge/hip caps, open seams, backed‑out screws or missing fastener washers, scuffed coating at panel edges, rattling in high winds
- Tile: Broken or displaced tiles, lifted ridge/hip tiles, missing clips or fasteners, rattling tiles indicating uplift
Low‑slope commercial roofs (TPO, EPDM, Modified Bitumen)
- Membrane billowing or fluttering (“tenting”) after gusts
- Opened seams/laps or fishmouths; loose or missing cover tape
- Fastener back‑out beneath plates; wrinkles radiating from plates
- Flashing pull‑off at walls, curbs, or penetrations; loose counterflashing/edge metal
- Ponding water where none existed before; stained ceiling tiles inside; musty odors
- Rooftop units shifted on curbs; displaced walkway pads or loose ballast around edges
Don’t overlook the “edges”
Wind concentrates damage at transitions and accessories:
– Gutters/downspouts: separation, sagging, or fallen sections
– Soffit/fascia: missing panels, gaps that allow wind‑driven rain
– Vents and skylights: cracked seals, loose flanges, or missing storm caps
– Siding near roofs: wind‑loosened panels that allow water entry
What to do right after a storm
- Stay safe. Avoid climbing on the roof—especially after wind, rain, or snow.
- Document. Take clear photos/videos from the ground and indoors where stains appear.
- Protect the interior. Use buckets, cover belongings, and shut off power near wet ceilings.
- Call a qualified roofer for a prompt inspection and temporary protection if needed.
- Keep receipts for any emergency mitigation—your insurer may reimburse these costs.
How AC INC. Roofing can help
AC INC. Roofing (Advanced Consulting, Inc.) is a licensed and insured contractor based in Denver, serving the Front Range and Cheyenne, WY. We specialize in storm damage evaluation, documentation, and repair.
- Free roof inspections by HAAG‑certified inspectors (Colorado’s first company to achieve Master HAAG Certification)
- Thorough photo reports and repair/replacement scopes to support insurance claims
- Directorii‑certified contractor (customer guarantee up to $20,000)
- Atlas Pro+ Platinum Certified (eligible for up to 50‑year warranties on qualifying systems)
- GAF Certified contractor (System Plus warranties available)
- Fortified Roofing Solutions certified—trained to recommend assemblies designed to withstand severe wind events
- 5.0‑star Google rating and trusted by homeowners and property managers across the Denver metro and Front Range
Repair or replace? Making the right call
- Localized damage: Missing shingles, a lifted ridge cap, or a small area of open seams can often be repaired quickly when caught early.
- Widespread uplift/creasing: Many creased or unsealed shingles, pervasive fastener back‑out on low‑slope membranes, or recurrent leaks often indicate it’s time for replacement.
We’ll explain options and costs so you can decide confidently.
Build back stronger in the Front Range
When repairs or replacement are needed, AC INC. Roofing offers premium materials and specifications tailored to wind and hail:
– Asphalt and impact‑resistant shingles, including Atlas shingle systems
– High‑wind detailing at eaves, rakes, and ridges; upgraded underlayments and fasteners
– Metal and tile systems engineered for uplift resistance
– TPO, EPDM, and Modified Bitumen with attachment methods selected for local wind zones
– Fluid‑applied coatings for certain commercial assemblies
Ask about Atlas Pro+ Platinum and GAF System Plus warranty options for qualifying installations.
Pro tips to reduce future wind damage
- Schedule routine inspections—annually and after major wind events
- Keep gutters clear and trim back overhanging branches
- Secure loose rooftop items (satellite dishes, holiday lighting anchors, walkway pads)
- Ensure edge metal, flashing, and attic ventilation are performing correctly
Our service area
From our office at 6145 Broadway, Suite 25, Denver, CO 80216, we serve:
– Denver metro area and the Colorado Front Range
– North to Cheyenne, Wyoming
Whether it’s a single‑family home, HOA, or commercial facility, we’re ready to help after the storm.
Ready for a trusted assessment after high winds? Contact Us today.