
AC INC. Roofing (Advanced Consulting, Inc.) is a licensed and insured contractor based at 6145 Broadway, Suite 25, Denver, CO 80216. We serve the Denver metro, Front Range, and Cheyenne, WY with residential and commercial roofing, storm restoration, and free roof inspections by Master HAAG–certified inspectors. Rated 5.0 stars on Google, we’re known for integrity, thorough documentation, and premium installations.
This guide explains what “reroofing” (overlay) and full replacement really mean, how costs break down in Colorado’s hail- and snow-prone climate, and when each option makes sense.
Reroofing vs. Replacement: What’s the difference?
- Reroofing (overlay): Installing new shingles over an existing single layer when allowed by code and manufacturer guidelines. No tear-off, faster, lower upfront cost—but limited warranty options and no chance to inspect/upgrade the roof deck or underlayment.
- Full replacement (tear-off): Removing existing roofing down to the deck, repairing wood as needed, and installing a complete roofing system (underlayment/ice barrier, flashing, ventilation, and new shingles/metal/tile). Higher upfront cost, but longer-term performance, eligibility for premium warranties, and code-compliant upgrades.
Note: In steep-slope asphalt, overlays are sometimes permitted if there is only one existing layer, the deck is sound, and local code allows it. Post-hail damage, overlays are often prohibited or not advisable. Our team confirms local requirements with your building department before any proposal.
Colorado cost factors you should expect
Front Range roofing prices vary by roof size/complexity, access, material, and code requirements. Here’s how the total is commonly built:
1) Permitting and inspections
– Municipality permit fees and inspections; documentation required in most Colorado jurisdictions.
2) Tear-off and disposal (replacement only)
– Labor to remove existing layers and underlayment, dumpster fees, landfill or recycling costs. Heavy impact on total cost if multiple layers or steep/complex roofs.
3) Decking repairs
– Replace damaged or delaminated OSB/plywood, renail to meet wind and snow-load requirements.
4) Weatherproofing
– Ice and water shield in eaves/valleys, synthetic underlayment, proper flashings at chimneys/sidewalls, and drip edge to current code.
5) Ventilation upgrades
– Ridge vents, intake (soffit) ventilation, and baffles to manage attic moisture and ice-dam risk common in Front Range freeze/thaw cycles.
6) Shingles or roof system
– Asphalt shingles (standard or impact-resistant Class 4), metal, tile, or for low-slope: TPO, EPDM, Modified Bitumen, or fluid-applied coatings.
7) Details and accessories
– Starter/ridge/hip shingles, pipe boots, skylight/roof-to-wall flashings, painted metals, and gutter tie-ins where needed.
8) Labor complexity
– Pitch, story height, number of facets, access, and safety measures (harnesses, scaffolding) affect timelines and cost.
9) Warranties and certifications
– Atlas Pro+ Platinum and GAF System Plus warranties typically require full system installations on a tear-off. Fortified Roofing Solutions for resilience (130 mph winds, EF-2 tornadoes, 2″ hail) entails prescribed components best achieved with a full replacement.
Typical Front Range price ranges (2025 ballpark)
Every roof is unique; these ranges are for planning only. Your actual quote follows an in-person HAAG-certified inspection.
Steep-slope asphalt (residential):
– Reroof overlay (where code allows, single existing layer, deck sound): roughly $400–$650 per square (100 sq ft)
– Full tear-off and replacement: roughly $550–$950 per square
– Impact-resistant (Class 4) upgrade: commonly +$30–$60 per square vs. standard shingles, often offset by potential insurance premium discounts
Metal or tile (steep-slope):
– Metal standing seam or high-end panels: commonly $1,000–$1,800 per square
– Concrete/clay tile: commonly $1,200–$2,000+ per square (structural load and fastening specs drive cost)
Low-slope/flat (commercial or sections of homes):
– TPO/EPDM recover (when allowed): about $4–$8 per sq ft
– Full tear-off and new TPO/EPDM/Mod Bit: about $7–$12+ per sq ft
– Fluid-applied coatings (life extension on sound roofs): about $2–$5 per sq ft
Note: Hail-region details—additional ice/water shield in valleys, thicker metals, and Class 4 shingles—add cost but often increase longevity and reduce storm vulnerability.
Example: 2,000 sq ft home (about 20 squares; 10–15% waste typical)
- Overlay (asphalt, code-allowed): $9,000–$14,000 total range
- Full tear-off/replacement (asphalt): $12,000–$21,000 total range
- Class 4 upgrade: commonly +$600–$1,200 on this size
These are illustrative only. A steep, cut-up roof, difficult access, skylights, or multiple chimneys may push higher; simple walkable gables trend lower.
Pros and cons in Colorado’s climate
Reroofing (overlay)
– Pros: Lower upfront cost, faster completion, less debris
– Cons: Adds weight (snow load matters), no deck inspection, fewer warranty options, can trap heat/moisture, may be disallowed after hail events, can complicate insurance and future repairs
Full replacement (tear-off)
– Pros: Fresh start to code; deck inspection/repair; upgrade underlayment/ice barrier and ventilation; better long-term performance; qualifies for premium manufacturer warranties; enables Fortified standards and impact-resistant systems
– Cons: Higher upfront cost, more labor and disposal, longer project timeline
Insurance and storm damage
- After hail or wind damage, insurers typically scope for full tear-off and replacement to restore pre-loss condition and meet current code. Overlays are rarely approved by carriers for storm claims.
- AC INC. Roofing’s Master HAAG–certified inspectors provide detailed reports, photos, and code documentation to support claims. We advocate for fair outcomes, coordinate with adjusters, and manage supplements for required code items (ice/water shield, ventilation, flashing).
Warranties and long-term value
- Atlas Pro+ Platinum Certified contractor: access to robust system warranties (up to 50-year coverage) typically requires full tear-off and complete Atlas system installation per specs.
- GAF Certified contractor: System Plus warranties available on qualifying full-system installs.
- Directorii-certified: Your project is backed by a third-party guarantee up to $20,000.
- Fortified Roofing Solutions: For homes seeking the highest resilience against high winds and large hail, a full replacement built to FORTIFIED standards can be a smart long-term investment.
Alternatives to consider
- Roof rejuvenation: For relatively young, aging asphalt shingles (no impact or structural damage), rejuvenation can extend service life at a lower cost.
- Targeted repairs: Flashings, pipe boots, and localized shingle repairs may solve small leaks.
- Flat-roof coatings: Extend service life and improve reflectivity when the membrane is still sound.
Why AC INC. Roofing
- Local, licensed, insured; 5.0-star reputation
- Free HAAG-certified inspections and honest recommendations
- Residential and commercial expertise: asphalt, impact-resistant shingles, metal, tile; TPO, EPDM, Modified Bitumen; fluid-applied coatings
- Atlas Pro+ Platinum, GAF Certified, Directorii-certified, and Colorado’s first company to hold Master HAAG Certification
- Meticulous documentation, insurance advocacy, and durable installations tailored to Colorado’s hail, wind, and snow-load realities
Next steps
- Not sure whether an overlay or full replacement fits your roof? We’ll evaluate layers, deck condition, ventilation, and code requirements, then present side-by-side options with transparent line items.
Contact Us today to schedule your free inspection in the Denver metro, Front Range, or Cheyenne.